TURF TRACER X-SERIES

TURF TRACER X-SERIES

Call for Price

Price

Make:
360 Yield Center
Model:
TURF TRACER X-SERIES

By virtually any measure, the Turf Tracer X-Series represents the definitive, full-featured hydro mower. Whether you choose the 52- or 60-inch cutting deck, the UltraCut™ Series 4 with splined spindle blade driver is up to the toughest jobs. As are the X-Series engines—Kohler® EFI, and Kawasaki®. Ground speeds up to 6.75 mph, and up to 2.25 in reverse, also rank the Turf Tracer X-Series among the most productive mowers in its class.

Mower Deck Widths: 52″ 60″

Equipment Specs

Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Casters .38″ thick caster yoke arms
Front Caster Tires 11 x 4.0-5, smooth tread, semi-pneumatic.
Drive Tires 18 x 8.5-8, 4-ply Turf Master®
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Parking Brake Lever-actuated mechanical compression.
Electrical 12-volt battery with 20-amp alternator.
Power Components
Engine Model ECV650
Engine Brand Kohler®
Engine Series Command™ EFI
Engine Speed 3,600 rpm
Air Filter Heavy-duty canister air filtration system
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1″ (2.54cm) tapered shafts.
Speed Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.
PTO Engagement Electromagnetic 200 ft-lbs clutch.
Fuel Capacity 5-gallon (18.9-L) fuel tank.
Drive Wheel Release Allows unit movement without engine running.
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Engine Type Electronic Fuel Injected
Engine Displacement 694
Drive Hydro-Drive
Fuel Indicator None
Carb Compliant Yes
Fuel Type Gas EFI
Model Description Turf Tracer X-Series 21 HP* Koh EFI ECV650 w/60″ UltraCut Series 4 Deck
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52″ and 60″
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
Cutting Heights 1.5″ (3.8 cm.) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments.
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.5″ Length
Width 73.0 in.
Length 84.8 in.
Height 45.0 in.
Curb Weight 760

Similar Products

TURF TRACER S-SERIES

TURF TRACER S-SERIES

With the Exmark Turf Tracer S-Series, you can choose from a variety of...